Snapper - Rear Tine Tiller

Below are all the different types of Snapper. Select the device of your choice, to download the manual

Contents

SET UP INSTRUCTIONS amp PRE OPERATIONAL CHECKLIST for SNAPPER INTERMEDIATE REAR TINE TILLER INTRODUCTION Uncrate unit and check for any damage and report immediately Make repairs as necessary The handle is shipped reversed and attached to the handle bracket to allow overall lower profile for shipment The two 2 8725 Hex Cap Screw and two 9 1606 Lock Nut in 6 1794 Hardware Bag are spare pieces for securing tines in case of shear bolt failure during operation Keep these pieces for future use STEP 1 Remove handle from L bracket Remove L bracket from handle bracket and discard Rotate handle around and prepare to secure to machine and handle bracket STEP 2 Wheel and Tine Control Bail is attached to the handle Install handle bar onto rear of main ...